MPU-6886 Datasheet | InvenSense

DESCRIPTION APPLICATIONS The MPU-6886 is a 6-axis Motion Tracking device that - Smartphones and Tablets bines a 3-axis gyroscope and a 3-axis accelerometer in a small 3 mm x 3 mm x 0.75 mm 24-pin LGA package. - Wearable sensors - Io T Applications - High performance specs: - Motion-based game controllers o Gyroscope sensitivity error: ±1% - 3D remote controls for Internet connected DTVs and o Gyroscope noise: ±4 mdps/√Hz o Accelerometer noise: 100 µg/√Hz ly - Includes 1 k B FIFO to reduce traffic on the serial bus interface, and reduce power consumption by - n allowing the system processor to burst read sensor l O data and then go into low-power mode tia - EIS FSYNC support IC MPU-6886 includes on-chip 16-bit ADC’s, programmable n digital filters, an embedded temperature sensor, and e H programmable interrupts. The device features an operating fid G voltage range down to 1.71V. munication ports include I2C and high speed SPI at 10 MHz. on for ORDERING INFORMATION PART TEMP RANGE PACKAGE C n MPU-6886† - 40°C to +85°C 24-Pin LGA se tio †Denotes Ro HS and Green-pliant Package Ad Ivnavnecne Sde Innforma BLOCK DIAGRAM set top boxes, 3D mice FEATURES - 3-Axis gyroscope with programmable FSR of ±250 dps, ±500 dps, ±1000 dps, and ±2000 dps - 3-Axis accelerometer with programmable FSR of ±2g, ±4g, ±8g, and ±16g - User-programmable interrupts - Wake-on-motion interrupt for low power operation of applications processor - 1 k B FIFO buffer enables the applications processor to read the data in bursts - On-Chip 16-bit ADCs and Programmable Filters - Host interface: 10 MHz SPI or 400 k Hz I2C - Digital-output temperature sensor - VDD operating range of 1.71V to 3.45V - MEMS structure hermetically sealed and bonded at wafer level - Ro HS and Green pliant TYPICAL OPERATING CIRCUIT This document contains information on a pre-production product. Inven Sense Inc. reserves the right to change specifications and information herein without notice.. Inven Sense Inc. 1745...