iT20420 Datasheet | Iterra

i TR20420 20-42 GHz General Purpose MMIC Amplifier Description The i TR20420 is a broadband general purpose driver amplifier designed for use in point to point radio, point to multi-point munications, LMDS, Sat and other millimeter wave applications. The i TR20420 is a fully matched Ga As MMIC utilizing an advanced 0.15µm gate length PHEMT process. ‹ ‹ ‹ ‹ ‹ ‹ Wideband 20 - 42 GHz operation 22 d B small signal gain (typ.) 23 d Bm saturated power output (typ.) RF input/output internally matched to 50 Ohms Optional bonding configuration for multiplier applications Chip Size 1.720 mm x 0.760 mm x 50 µm Features .. Absolute Ratings Parameter Positive DC Voltage (+3.5 V Typical) Negative DC Voltage Simultaneous (VD - VG) Positive DC Current RF Input Power (from 50 Ω source) Operating Base Plate Temperature Storage Temperature Range Thermal Resistance (Channel to Backside) Symbol VD VG VDG ID Pin Tc Tstg Rjc Value +5 -2 +7 600 15 -30 to +85 -55 to +125 57 Unit Volts Volts Volts m A d Bm °C °C °C/W Electrical Characteristics1 Parameter Frequency Range Drain Supply Voltage (VD) Gate Supply Voltage (VG)2 Small Signal Gain3 (f=20-22 GHz) (f=22-42 GHz) Gain Variation vs. Frequency Power Output at 1 d B pression Min 20 2 -2 18 20 Typ 3.5 -0.6 20 22 +/-2.5 21 Max Unit Parameter Power Output Saturated Drain Current at P1d B pression Drain Current at Psat Input Return Loss (Pin=-20 d Bm) Output Return Loss (Pin=-20 d Bm) Min 22 Typ 23 355 362 12 10 Max Unit d Bm m A m A d B d B 42 GHz 5 V -0.15 V d B d B d B d Bm Notes: 1. Operated at 25 °C, 50 Ohm system, VD=+3.5 V, quiescent current (IDQ)=350 m A. 2. Typical range of the negative gate voltage is -0.9 to - 0.15 V to set typical IDQ of 350 m A. 3. Production measurements for small signal gain are made over a frequency range of 20 to 40 GHz. 4. Saturated power measurements are not 100% tested, but guaranteed by design. .iterrac. Specifications are based on most current or latest revision. R3.1....