SM8S12CA - Surface Mount Transient Voltage Suppressors

JIEJIE

Key Features

Junction passivation optimized design passivated anisotropic rectifier technology.
TJ = 175℃ capability suitable for high reliability and automotive requirement.
Available in bi-directional polarity.
Low leakage current.
Low forward voltage drop.
High surge capability.
Meets ISO16750-2 surge specification(varied by test condition).
Meets MSL-1, per J-STD-020, LF maximum peak of 245℃.
AEC-Q101 qualified. .

SM8S12CA surface mount transient voltage suppressors by JIEJIE - Datasheet Preview

Datasheet Details

Part number	SM8S12CA
Manufacturer	JIEJIE
File Size	318.20 KB
Description	Surface Mount Transient Voltage Suppressors
Datasheet	SM8S12CA Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
SM8S12CA	6600W Transient Voltage Suppressor	Leiditech
SM8S12CA	TRANSIENT VOLTAGE SUPPRESSOR	ZEN ELECTRONIC
SM8S12CA	Surface Mount Transient Voltage Suppressors	SOCAY
SM8S12CA	SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR	EIC
SM8S12CA	Transient Voltage Suppressors	Vishay

Other Datasheets by JIEJIE

Part Number	Description
SM8S12A	Surface Mount Transient Voltage Suppressors
SM8S10A	Surface Mount Transient Voltage Suppressors
SM8S11A	Surface Mount Transient Voltage Suppressors
SM8S13A	Surface Mount Transient Voltage Suppressors
SM8S13CA	Surface Mount Transient Voltage Suppressors

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

SM8S12CA thru SM8S36CA JIEJIE MICROELECTRONICS CO. , Ltd Surface Mount Transient Voltage Suppressors Rev.1.1 High Temperature Stability and High Reliability Conditions FEATURES  Junction passivation optimized design passivated anisotropic rectifier technology  TJ = 175℃ capability suitable for high reliability and automotive requirement.  Available in bi-directional polarity  Low leakage current  Low forward voltage drop  High surge capability  Meets ISO16750-2 surge specification(varied by test condition)  Meets MSL-1, per J-STD-020, LF maximum peak of 245℃.  AEC-Q101 qualified.