Datasheet4U Logo Datasheet4U.com

JMB356 - eSATA+1394A/B + USB20 to Dual SATA Host Adapter

Description

The JMB356 is single chip solution to bridge between USB 2.0 host or 1394 host and SATA device.

highly integrated USB 2.0, 1394A/B and SATA Phys technology provides a cost-effective solution to apply SATA to SATA device or USB to SATA device or 1394 to SATA device enclosure.

Features

  • Compliance with Gen1i/Gen1m of Serial ATA II Electrical Specification 2.6 Support SATA II Asynchronous Signal Recovery (Hot Plug) feature Compliance with USB 2.0 electrical specification Support USB High-Speed and Full-Speed Operation Compliance with USB Mass Storage Class, Bulk-Only Transport Specification Support Asynchronous Transfers at 100/200 and 400 Mb/s for 1394a www. DataSheet. co. kr Support 1394A/B SBP-2 Acceleration Feature to optimize performance Compliance with IEEE Std 1394-1995, IE.

📥 Download Datasheet

Datasheet preview – JMB356

Datasheet Details

Part number JMB356
Manufacturer JMicron
File Size 172.44 KB
Description eSATA+1394A/B + USB20 to Dual SATA Host Adapter
Datasheet download datasheet JMB356 Datasheet
Additional preview pages of the JMB356 datasheet.

📁 Similar Datasheet

  • JMB368 - PCI Express to PATA Host Controller (JMicron Technology)
Other Datasheets by JMicron
  • JMB350 - SATA II Port Multiplier
  • JMB352 - High-Speed USB & SATA II Combo to Dual SATA II RAID Bridge
  • JMB352U - High-Speed USB & SATA II Combo to Dual SATA II Port Multiplier(1 to 2) Bridge
  • JMB353 - 1394a + USB20 to SATA Host Adapter
  • JMB355 - eSATA+1394A/B + USB20 to SATA Host Adapter
  • JMB310 - USB2.0 UVC WebCam Controller
  • JMB311 - USB2.0 UVC WebCam Controller
  • JMB312 - USB2.0 UVC WebCam Controller

Full PDF Text Transcription

Click to expand full text
JMicron/JMB356 JMB356 eSATA+1394A/B + USB20 to Dual SATA Host Adapter Description The JMB356 is single chip solution to bridge between USB 2.0 host or 1394 host and SATA device. The highly integrated USB 2.0, 1394A/B and SATA Phys technology provides a cost-effective solution to apply SATA to SATA device or USB to SATA device or 1394 to SATA device enclosure. The USB adheres to the Mass Storage Class Bulk-Only Transport Specification. The embedded command parser supports both ATA and ATAPI command set with LBA48 bit addressing capability. The 1394 adheres to SBP-2 specification. And SBP-2 acceleration hardware is embedded to off-load CPU and easy firmware control. Features Compliance with Gen1i/Gen1m of Serial ATA II Electrical Specification 2.
Published: |