JMicron JMF605
JMF605 is a single chip, supports SATA II to NAND flash interface. It is native design to provide higher bandwidth for flash memory access. It also provides the embedded hardware error correction code (ECC), wear leveling, and bad block management technology in this chip.| Part No. | JMF605 |
|---|---|
| Datasheet | JMF605 Download |
| Manufacturer |  JMicron |
| Description | ARM Base SATAII to Flash Controller |
| Buy | Stock & Price |
FEATURES
Compliance● Compliant with Serial ATA International Organization: Serial ATA Revision 2.6. SATA I/II
● Supports 1-port 1.5/3.0Gbps SATA I/II interface. CPU
● Embedded processor.
● Embedded masked program ROM.
● Embedded system RAM. FLASH
● Supports maximum CEs to 16 CEs.
● Support 5x/4x/3x/2x nm Flash
● Enhanced endurance by dynamic/static wear-leveling.
● Supports 4K/8K bytes page size.
● Supports dynamic power management.
● SMART (Self-Monitoring, Analysis and Reporting Technology). Copyright @ 2011 Jmicron Technology Crop. All rights reserved. Product Brief Version 1.0 NDA Required 2011/03/01 Datasheet pdf - JMF605
● Data integrity under power-cycling.
● Supports 8 bits Flash interface.
● Supports BCH ECC 16 bits or 24 bits in 1024 bytes SYSTEM
● Integrated 1-SATA II port and 4-channels Flash controller.
● LED indicator for SATA read/write access.
● LED indicator for SATA PHY link up.
● Provides 8 GPIO pins for customer.
● Provides UART and JTAG for S/W debugging.
● Built-in power-up self-test (BIST).
