JMicron JMS539
The JMS539 is a bridge controller, which translates the communication protocol between SATA II 3.0G and SuperSpeed USB commands. The integrated 60MIPS 8051, SATA II, Hi-Speed USB and SuperSpeed USB technology enable users to perform SuperSpeed USB to SATA II 3.0G, applications in a signal chip.| Part No. | JMS539 |
|---|---|
| Datasheet | JMS539 Download |
| Manufacturer |  JMicron |
| Description | SuperSpeed USB to SATA II 3.0G Bridge |
| Buy | Stock & Price |
DESCRIPTION
In this chip, the Hi-Speed/SuperSpeed USB controller supports the USB Mass Storage Class Bulk-Only Transport Specification.FEATURES
● Complies with Gen2i/Gen2m of Serial ATA II Electrical Specification 2.6● Supports SATA II Asynchronous Signal Recovery (Hot Plug) feature
● Complies with USB 3.0 Specification, USB Mass Storage Class, Bulk-Only Transport Specification
● Supports USB Super-Speed/High-Speed/Full-Speed Operation
● Supports USB HID operation
● Supports USB2.0/USB3.0 power saving mode
● Supports AES-128/256 for data encryption over USB2.0/USB3.0
● Supports external SPI NVRAM for Vendor VID/PID of USB2.0/USB3.0 device controller
● Supports ATA/ATAPI PACKET command set
● 12 GPIOs for customization
● Provides hardware control PWM
● Provides software utilities for downloading the upgraded firmware code under USB2.0/USB3.0
● Design for Win2000, WinXP, WinVista, Win7, MAC 9.2 or later version.
● Supports 25MHz external crystal
● Embedded 3.3V to 1.2V voltage regulator...
