Datasheet4U Logo Datasheet4U.com

NJU6061 - Full Color LED Controller Driver

General Description

The NJU6061 is a full color LED controller driver.

It can control and drive a 3 in 1 packaged (Red, Green and Blue) LED.

The NJU6061 contains PWM luminance (Pulse Width Modulation) control circuit , LED driving circuit, MPU interface and so on.

Key Features

  • Controlling a 3-in-1 packaged RGB LED Built-in PWM luminance control Built-in 8bit serial interface circuit Cascade connect Sweep operation function Brightness correction Built-in oscillation circuit Operating voltage Package CMOS Technology ILED=30mA x 3 16 steps x 3 (Internal 128 steps x 3) 1.7V to 5.5V SSOP14 Ver.2012-07-31 -1- NJU6061 PIN.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NJU6062 Full Color LED Controller Driver New Japan Radio
NJU6063 RGB LED Controller Driver New Japan Radio
NJU6010 24 keys input key-scan IC New Japan Radio
NJU6014 REMOTE CONTROL COMMANDER IC New Japan Radio
NJU6080 CONSTANT CURRENT LED DRIVER New Japan Radio

Other Datasheets by New Japan Radio

Part Number Description
NJU6060 Full Color LED Controller Driver
NJU6043 PWM WHITE LED DRIVER
NJU6048 High Efficiency White LED Driver
NJU6049 High Efficiency White LED Driver
NJU6050 High Efficiency White LED Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NJU6061 Full Color LED Controller Driver with PWM Control GENERAL DESCRIPTION The NJU6061 is a full color LED controller driver. It can control and drive a 3 in 1 packaged (Red, Green and Blue) LED. The NJU6061 contains PWM luminance (Pulse Width Modulation) control circuit , LED driving circuit, MPU interface and so on. The PWM signal control the duty cycle of each RGB LED delicately, therefore can realize a lot of colors. The Sweep Operation function can simplify the LED brightness control. The Brightness Correction function can fake a linear change of the LED brightness in human eyes. Enable terminal (ON/OFF) is possible to synchronize with a sound source etc.