Datasheet4U Logo Datasheet4U.com

NJU7382 - Stepper Motor / FFP16-C1

General Description

The NJU7382 is a dual H-bridge driver IC especially developed low voltage small stepper motor applications.

It consists of a pair of low consumption CMOS H-bridge drivers protected by thermal shutdown circuit.

Key Features

  • S.
  • Operating Voltage 2.0V to 5.5V.
  • Two CMOS H-bridge drivers for stepper motor driving.
  • Motor Output Current 200mA(continuous), 400mA(peak).
  • Chip enable function.
  • General purpose comparator.
  • Thermal shutdown circuit.
  • CMOS technology.
  • Package Outline FFP16 (2.5×2.5×h0.85mm).
  • BLOCK.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NJU7382A LOW VOLTAGE OPERATION DUAL H-BRIDGE DRIVER New Japan Radio
NJU7381A LOW VOLTAGE OPERATION DUAL H BRIDGE DRIVER New Japan Radio
NJU7384 Digital Signal Processor New Japan Radio
NJU7385 Dual H-bridge Driver New Japan Radio
NJU7301 C-MOS QUAD SPST ANALOG SWITCH New Japan Radio

Other Datasheets by New Japan Radio

Part Number Description
NJU7380 STEPPER MOTOR CONTROLLER
NJU7381 DUAL H-BRIDGE DRIVER
NJU7329B Single-phase DC Brushless Motor Driver IC
NJU7332 Single-phase DC Brushless Motor Driver IC
NJU7333 Single-phaseDC Brushless Motor Driver IC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NJU7382 www.DataSheet4U.com DUAL H BRIDGE DRIVER WITH COMPARATOR ■ Package Outline ■ GENERAL DESCRIPTION The NJU7382 is a dual H-bridge driver IC especially developed low voltage small stepper motor applications. It consists of a pair of low consumption CMOS H-bridge drivers protected by thermal shutdown circuit. It is also including a general-purpose comparator suited for detection from photo reflector as rotor position sensor or current limitation. NJU7382PC1 The NJU7382 adopt a very small FFP package, it is suitable for mobile or portable applications using micro stepper motors. ■ FEATURES •Operating Voltage 2.0V to 5.