Datasheet4U Logo Datasheet4U.com

NJW1119A - 3-Band Tone Control IC

General Description

stereo EQ circuit.

distortion and low output noise.

All of internal status are controlled by three-wired serial bus.

Key Features

  • S.
  • Operating Voltage.
  • 3-Wired Serial Control.
  • Low Total Harmonic Distortion.
  • Low Output Noise.
  • Tone Control.
  • Bi-CMOS Technology.
  • Package Outline.
  • Mute Function 4.5 to 7.5V Chip Address Select Function 0.0002% typ. @Tone=OFF -120dB typ. @Tone=OFF 0 to ±12dB/1dB Step (100Hz/1kHz/10kHz) SSOP32.
  • BLOCK.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NJW1110 9-IN 3-OUT STEREO AUDIO SELECTOR New Japan Radio
NJW1111 9-Input 3-Output Stereo Audio Selector New Japan Radio
NJW1112 8-In 4-Out Stereo Audio Selector NJR Corporation
NJW1102 DOLBY PRO LOGIC SURROUND DECODER New Japan Radio
NJW1102A DOLBY PRO LOGIC SURROUND DECODER New Japan Radio

Other Datasheets by New Japan Radio

Part Number Description
NJW1139A Audio Processor
NJW1142A Audio Processor
NJW1146A Audio Processor
NJW1147A Audio Processor
NJW1149A Audio Processor

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NJW1119A 3-Band Tone Control IC  GENERAL DESCRIPTION The NJW1119A is a Tone Control IC including 3-Band stereo EQ circuit. It performs superior audio characteristics such as low distortion and low output noise. All of internal status are controlled by three-wired serial bus. Selectable 4-Chip address is available for using four chips on same serial bus line. It is suitable for any audio applications.  PACKAGE OUTLINE NJW1119AV  APPLICATIONS •AV amplifier/receiver •Car Audio •Mini/Micro components  FEATURES • Operating Voltage • 3-Wired Serial Control • Low Total Harmonic Distortion • Low Output Noise • Tone Control • Bi-CMOS Technology • Package Outline • Mute Function 4.5 to 7.5V Chip Address Select Function 0.0002% typ. @Tone=OFF -120dB typ.