Datasheet4U Logo Datasheet4U.com

NJW4822 - 1-Channel Low Side Switch

General Description

The NJW4822 is the single low-side switch that can supply 0.2A.

The active clamp, overcurrent, error flag output and thermal shutdown are built in with Nch MOS FET.

It can be controlled by a logic signal (3V/5V) directly.

Key Features

  • S.
  • Drain-Source Voltage 43V.
  • Drain Current 0.2A.
  • Corresponding with Logic Voltage Operation: 3V/5V.
  • Low On-Resistance 1.1 (typ. ) (VIN=5V).
  • Low Consumption Current 1.3 (typ. ) (VIN=3.3V) 160A (typ. ) (VIN=5V).
  • Active Clamp Circuit 135A (typ. ) (VIN=3.3V).
  • Over Current Protection.
  • Thermal Shutdown.
  • Package Outline DFN6-H1 (ESON6-H1).

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NJW4820 Single Low Side Switch New Japan Radio
NJW4800 30V/4A Half Bridge Driver New Japan Radio
NJW4801 Small PKG Half Bridge Driver New Japan Radio
NJW4810 35V / 1A H-Bridge Driver New Japan Radio
NJW4810A Dual Half Bridge Driver New Japan Radio

Other Datasheets by New Japan Radio

Part Number Description
NJW4828-A Parallel Input 8-channel Sink Driver
NJW4108 Lithium-ion Battery Charger Controller
NJW4119 BUCK SWITCHING REGULATOR
NJW4120 Lithium-Battery Charger Controller
NJW4124 Lithium-Battery Charger Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NJW4822 1-Channel Low Side Switch  GENERAL DESCRIPTION The NJW4822 is the single low-side switch that can supply 0.2A. The active clamp, overcurrent, error flag output and thermal shutdown are built in with Nch MOS FET. It can be controlled by a logic signal (3V/5V) directly. Especially, the NJW4822 is suitable for various Sensors output block as NPN type. The FLT logic has two versions: Active-high (A-ver) and Active-low (B-ver). Also, The NJW4822 is a complementary product to the NJW4832.  FEATURES  Drain-Source Voltage 43V  Drain Current 0.2A  Corresponding with Logic Voltage Operation: 3V/5V  Low On-Resistance 1.1 (typ.) (VIN=5V)  Low Consumption Current 1.3 (typ.) (VIN=3.3V) 160A (typ.) (VIN=5V)  Active Clamp Circuit 135A (typ.) (VIN=3.