Datasheet4U Logo Datasheet4U.com

302S41N101BF4E - Ceramic Capacitors

General Description

The test board is designed so that the capacitance of the part can be measured while the part is being flexed (See figure 1).

The capacitor is mounted at the center of the board.

Key Features

  • Lead Free Terminations 100% Sn, Final Termination.
  • Electrodes: Pd/Ag.
  • Core Termination: PolyTerm®.
  • Middle Barrier Layer: Ni.
  • External Termination Layer: 100% Sn http://www. DataSheet4U. net/.
  • NP0 and X7R temperature coefficient.
  • Highly reliable performance.
  • Industry standard case sizes How to Order 302.

📥 Download Datasheet

Datasheet Details

Part number 302S41N101BF4E
Manufacturer Johanson
File Size 284.78 KB
Description Ceramic Capacitors
Datasheet download datasheet 302S41N101BF4E Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
3020 LED Lumileds
3021-xxxx OEM Accelerometer / Analog IC IC Sensors
3022 PC Board Mountable Accelerometer Millivolt Output Low Cost ICS
3026-xxx Oblique Angle Entry Modular Telephone Jack Singatron
3028 Silicon N-channel Power F-mosFET Panasonic

Other Datasheets by Johanson

Part Number Description
302S48Nxxxx Ceramic Capacitors

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.johansondielectrics.com High Voltage PolyTerm® Ceramic Capacitors Standard MLCCs are prone to cracking due to mishandling, depanelization, and board flexing. In response to customer requests for higher resistance to mechanical stress, and as a result of continuous efforts to improve our products, JDI has introduced PolyTerm® termination ceramic capacitors to meet those customer requirements for increased resistance to flexure cracking. PolyTerm® is a conductive epoxy termination material loaded with silver, allowing it to absorb much more bending force than standard termination material. After termination PolyTerm® parts are nickel and tin plated using the same process as standard parts. There is no effect on solderability or capability to withstand the soldering process.