Datasheet4U Logo Datasheet4U.com

JW1237 - Adaptive 100/120Hz Current Ripple Remover

General Description

JW1237, integrated with 150V NMOSFET, is used to drive a LED string, and remove the 100/120Hz LED current ripple on AC/DC power by a capacitor between VC and GND.

The adaptive technology ensures minimum power dissipation on JW1237 while removing LED current ripple.

Key Features

  • Adaptive 100/120Hz current ripple remover 150V high voltage.

📥 Download Datasheet

Datasheet Details

Part number JW1237
Manufacturer JoulWatt
File Size 819.83 KB
Description Adaptive 100/120Hz Current Ripple Remover
Datasheet download datasheet JW1237 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
JW1236B Full color LED control chip ETC
JW1758A Offline Step-down LED Controller SPMICRO
JW1758B Offline Step-down LED Controller SPMICRO
JW1758C Offline Step-down LED Controller SPMICRO
JW1760 Non-Isolated Buck LED Driver Controller SPMICRO

Other Datasheets by JoulWatt

Part Number Description
JW1232 Adaptive 100/120Hz Current Ripple Remover
JW1233 Adaptive 100/120Hz Current Ripple Remover
JW1210 Scalable Adaptive 100/120Hz Current Ripple Remover
JW1220 Controller for Adaptive 100/120Hz Current Ripple Removing Circuit
JW1221 Controller for Adaptive 100/120Hz Current Ripple Removing Circuit

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
JW1237 Adaptive 100/120Hz Current Ripple Remover With High Voltage MOSFET Integrated Parameters Subject to Change Without Notice DESCRIPTION JW1237, integrated with 150V NMOSFET, is used to drive a LED string, and remove the 100/120Hz LED current ripple on AC/DC power by a capacitor between VC and GND. The adaptive technology ensures minimum power dissipation on JW1237 while removing LED current ripple. JW1237 clamps the input voltage on VIN pin to 31V. Only one resistor is needed when the output voltage of AC/DC power is higher than 31V. JW1237 allows user to setup maximum LED current by the sensing resistor between VS pin and GND, which protects JW1237 from being damaged when LED short connected or hot-plug.