K24C16B Datasheet PDF

K-Line K24C16B

The K24C16B does not use the device address pins, which limits the number of devices on a single bus to one. The A0, A1, and A2 pins are no connects and can be connected to ground. This pin is open-drain driven and may be wire-ORed with any number of other open-drain or open- collector devices.

Part No.	K24C16B
Datasheet	K24C16B Download
Manufacturer	K-Line
Description	Two-wire Serial EEPROM
Buy	Stock & Price

FEATURES

?Wide Voltage Operation - VCC = 1.8V to 5.5V ?Operating Ambient Temperature: -40● C to +85● C ?Internally Organized: - K24C02C, 256 X 8 (2K bits) - K24C04, 512 X 8 (4K bits) - K24C08C, 1024 X 8 (8K bits) - K24C16B, 2048 X 8 (16K bits) ?Two-wire Serial Interface ?Schmitt Trigger, Filtered Inputs for Noise Suppression ?Bidirectional Data Transfer Protocol ?1 MHz (5V), 400 kHz (1.8V, 2.5V, 2.7V) Compatibility ?Write Protect Pin for Hardware Data Protection ?8-byte Page (2K), 16-byte Page (4K, 8K, 16K) Write Modes ?Partial Page Writes Allowed ?Self-timed Write Cycle (5 ms max) ?High-reliability - Endurance: 1 Million Write Cycles - Data Retention: 100 Years ?8-lead PDIP/SOP/MSOP/TSSOP, 8-pad DFN, and SOT23-5 packages

GENERAL DESCRIPTION

The K24C02C/K24C04/K24C08C/K24C16B provides 2048/4096/8192/16384 bits of serial electrically erasable and programmable read-only memory (EEPROM) organized as 256/512/1024/2048 words of 8 bits each. The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operation are essential.