ABS205
ABS205 is MINI SILICON SURFACE MOUNT BRIDGE RECTIFIER manufactured by KD.
FEATURES
- Ideal for printed circuit board
- Reliable low cost construction technique results in inexpensive product
- High temperature soldering guaranteed :
260°C / 10 seconds / 0.375” ( 9.5mm ) lead length at 5 lbs., ( 2.3 kg ) tension
MECHANICAL DATA
- Case : Molded Plastic
- Epoxy : Device has UL flammability classification 94V-0
- Mounting Position : Any
- Marking : Type Number
0.006(0.15) 0.002(0.05)
0.177(4.5) 0.169(4.3) 0.252(6.4) 0.236(6.0) 0.006(0.15) 0.002(0.05)
0.056(1.42) 0.048(1.22) 0.059(1.50) MAX.
0.136(3.45) 0.128(3.25) 0.161(4.1) 0.154(3.9)
0.028(0.7) 0.024(0.6)
0.20(5.1) 0.193(4.9)
0.028(0.7) 0.012(0.3) DETAIL "A", SCALE=20/1
0.033(0.85) 0.026(0.65)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%.
Characteristic
Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage
RMS Reverse Voltage
Average Rectified Output Current (Note 1) @TA = 50°C Average Rectified Output Current (Note 2) @TA = 50°C
Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method)
I2t Rating for Fusing (t < 8.3ms)
Forward Voltage per element
Peak Reverse Current At Rated DC Blocking Voltage
@IF = 2.0A
@TA = 25°C @TA = 125°C
Typical Junction Capacitance per leg (Note 3)
Typical Thermal Resistance per leg (Note 1)
Operating and Storage Temperature Range
Symbol
ABS 205
ABS 21
VRRM...
