C4AEJBU4800A11J Datasheet | KEMET Electronics

.Data Sheet.co.kr C4AE BOX CAPACITORS DC LINK C4AE SERIES Ro HS PLIANT CAPACITORS FOR PCB APPLICATIONS P [mm] 27.5 37.5 52.5 nr pins 2 4 4 Ød [mm] 0.8 1.2 1.2 all dimensions are in mm GENERAL TECHNICAL DATA Dielectric Application Climatic category Max. operating temperature Upper temperature TMAX Lower temperature TMIN Standard Protection Installation Leads Packaging Ro HS pliance ELECTRICAL CHARACTERISTICS Capacitance tolerance Dissipation factor PP typical (tgδ0) Surge voltage Overvoltage (IEC 61071) Peak non Repetitive current Insulation Resistance Capacitance deviation in operation Permissible relative humidity LIFE EXPECTANCY Life expectancy Capacitance drop at end of life Failure rate IEC 61709 TEST METHOD Test voltage between terminals Test voltage between terminals and case Damp Heat Change of temperature Polypropylene metallized film - non inductive self-healing DC filtering / DC-Link 40/85/56 IEC 60068-1 +105°C +85°C IEC 61071 - Endurance Test Temperature -40°C IEC 61071 Solvent resistant plastic case UL94 V-0 Thermosetting resin sealing UL94 V-0 pliant Any position Tinned copper wires - standard lead wire length 6 (0/-2) mm Packed in cardboard trays with protection for the terminals pliant with the restricted substance requirements of Directive 2002/95/EC ± 5% at T = 25°C ≤ 0.0002 at 10k Hz with T = 25°C ±5°C 1.5 - UNDC for max 10 times in life time at 25°C 1.15 - UNDC for max 30 min - once per day 1.3 - UNDC for max 1 min - once per day 1.5 - Ipkr - max 1000 times in life time IR x C ≥ 30.000 seconds at 100Vdc 1 min. T = 25°C ±1.5% max. on capacitance value measured at T = 25°C Annual average ≤ 70%; 85% on 30 days/year randomly distributed throughout the year. Dewing not admissible 100.000 hours at UNDC @ Hot-Spot temperature THS = 85°C -5% (typical) 300 FIT at UNDC @ Hot-Spot temperature THS = 85°C - UNDC for 10sec or 1.65 UNDC for 2sec, at T = 25°C 3.2 k Vac 50Hz for 2sec IEC 60068-2-78 IEC 60068-2-14 STP/AC 24th Feb...