1) Transmitter(IRED) drive current : IFP = 300mAP-P ~ 600mAP-P 2) R-C Decoupling Filter with Lower Cut-off Frequency : R=100
Ù , C=47
Þ : 10k
Ù over ¢¡ fc = 1/2
ð RC = 33.9Hz 3) External pull-up resistor(optional) Vcc C Rp micom GND
2/2
Features
¤ýWide angle design ¤ýSupply-voltage range : 4.5V to 5.5V ¤ýShielded against electrical field disturbance ¤ýEnhanced immunity against ambient light disturbances ¤ýEnhanced reception distance ¤ýContinuous data transmission possible (NRZ 1000 bit/s) ¤ýAvailable for carrier frequencies between 32.7KHz to 56.9KHz ¤ýTTL and CMOS compatible.
The following content is an automatically extracted verbatim text
from the original manufacturer datasheet and is provided for reference purposes only.
View original datasheet text
Optic receiver module
KSM-90¡àLM1N
The KSM-90¡àLM1N consist of a PIN Photodiode of high speed and a preamplifier IC in the package as an receiver for Infrared remote control systems Features ¤ýWide angle design ¤ýSupply-voltage range : 4.5V to 5.5V ¤ýShielded against electrical field disturbance ¤ýEnhanced immunity against ambient light disturbances ¤ýEnhanced reception distance ¤ýContinuous data transmission possible (NRZ 1000 bit/s) ¤ýAvailable for carrier frequencies between 32.7KHz to 56.
KSM-902LM1N Datasheet
