Datasheet4U Logo Datasheet4U.com

S8100 - Power LED Driver IC

General Description

The S8100 is a PWM high-efficiency LED driver control IC.

It allows efficient operation of High Brightness (HB) LEDs.

The S8100 is capable to drive high current, high brightness LEDs up to 1.0 A by using additional external output stages as Power MOSFET.

Key Features

  • Vcc : 2.5V~18V.
  • Low Quiescent Current : 0.8mA.
  • Output Source current : 0.15mA.
  • PWM Dimming with pull-up resistor control.
  • Stability compensation with 0.1µF ceramic capacitance.
  • Small Surface-Mount SOT-26 Package.
  • Halogen-Free Package is Available Package : SOT-26 ◈ Pin Assignment &.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
S8119 Photo-IC HAMAMATSU
S81215AG VOLTAGE REGULATOR Seiko Instruments
S81225AG VOLTAGE REGULATOR Seiko Instruments
S81225SG HIGH-PRECISION VOLTAGE REGULATOR Seiko Instruments
S81230AG VOLTAGE REGULATOR Seiko Instruments

Other Datasheets by KODENSHI (Kodenshi AUK Group)

Part Number Description

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
S8100 Power LED Driver IC ◈ Description The S8100 is a PWM high-efficiency LED driver control IC. It allows efficient operation of High Brightness (HB) LEDs. The S8100 is capable to drive high current, high brightness LEDs up to 1.0 A by using additional external output stages as Power MOSFET. The S8100 provides a low-frequency PWM dimming input that can accept an external control signal with a duty ratio of 0-100% and a frequency of typical 100Hz. The output current can be programmed between a few milliamps and up to more than 1.0A. The device is a small surface mount package (SOT-26) ◈ Features • Vcc : 2.5V~18V • Low Quiescent Current : 0.8mA • Output Source current : 0.15mA • PWM Dimming with pull-up resistor control • Stability compensation with 0.