KK74AC163 Datasheet | Kodenshi AUK Group

feature parallel Load, synchronous Reset, a Carry Output for cascading and count-enable controls. The KK74AC163 is binary counter with synchronous Reset. - Outputs Directly Interface to CMOS, NMOS, and TTL - Operating Voltage Range: 2.0 to 6.0 V - Low Input Current: 1.0 µA; 0.1 µA @ 25° C - High Noise Immunity Characteristic of CMOS Devices - Outputs Source/Sink 24 m A ORDERING INFORMATION KK74AC163N Plastic KK74AC163D SOIC TA = -40° to 85° C for all packages LOGIC DIAGRAM PIN ASSIGNMENT PIN 16 =VCC PIN 8 = GND Inputs Reset L H H H H X Load X L H H H X Enable P X X X L H X FUNCTION TABLE Outputs Enable T X X L X H X Clock Q0 L P0 Q1 L P1 Q2 L P2 Q3 L P3 Function Reset to “0” Preset Data No count No count Count No count No change No change Count up No change X=don’t care P0,P1,P2,P3 = logic level of Data inputs Ripple Carry Out = Enable T - Q0 - Q1 - Q2 - Q3 .. MAXIMUM RATINGS- Symbol VCC VIN VOUT IIN IOUT ICC PD Tstg TL - Parameter DC Supply Voltage (Referenced to GND) DC Input Voltage (Referenced to GND) DC Output Voltage (Referenced to GND) DC Input Current, per Pin DC Output Sink/Source Current, per Pin DC Supply Current, VCC and GND Pins Power Dissipation in Still Air, Plastic DIP+ SOIC Package+ Storage Temperature Lead Temperature, 1 mm from Case for 10 Seconds (Plastic DIP or SOIC Package) Value -0.5 to +7.0 -0.5 to VCC +0.5 -0.5 to VCC +0.5 ±20 ±50 ±50 750 500 -65 to +150 260 Unit V V V m A m A m A m W °C °C Maximum Ratings are those values beyond which damage to the device may occur. Functional operation should be restricted to the Remended Operating Conditions. +Derating - Plastic DIP: - 10 m W/°C from 65° to 125°C SOIC Package: : - 7 m W/°C from 65° to 125°C REMENDED OPERATING CONDITIONS Symbol VCC VIN, VOUT TJ TA IOH IOL tr, tf Parameter DC Supply Voltage (Referenced to GND) DC Input Voltage, Output Voltage (Referenced to GND) Junction Temperature (PDIP) Operating Temperature, All Package Types Output Current - High Output...