KK74AC164 Datasheet | Kodenshi AUK Group

TECHNICAL DATA .. 8-Bit Serial-Input/Parallel-Output Shift register High-Speed Silicon-Gate CMOS The KK74AC164 is identical in pinout to the LS/ALS164, HC/HCT164. The device inputs are patible with standard CMOS outputs; with pullup resistors, they are patible with LS/ALS outputs. The KK74AC164 is an 8-bit, serial-input to parallel-output shift register. Two serial data inputs, A1 and A2, are provided so that one input may be used as a data enable. Data is entered on each rising edge of the clock. The active-low asynchronous Reset overrides the Clock and Serial Data inputs. - Outputs Directly Interface to CMOS, NMOS, and TTL - Operating Voltage Range: 2.0 to 6.0 V - Low Input Current: 1.0 µA; 0.1 µA @ 25°C - High Noise Immunity Characteristic of CMOS Devices - Outputs Source/Sink 24 m A ORDERING INFORMATION KK74AC164N Plastic KK74AC164D SOIC TA = -40° to 85° C for all packages PIN ASSIGNMENT LOGIC DIAGRAM FUNCTION TABLE Inputs Reset L H H PIN 14 =VCC PIN 7 = GND Clock X A1 A2 X X X X H D L Outputs QA QB ... QH L ... L no change D QAn ... QGn H D H D QAn ... QGn D = data input X = don’t care QAn - QGn = data shifted from the previous stage on a rising edge at the clock input. .. MAXIMUM RATINGS- Symbol VCC VIN VOUT IIN IOUT ICC PD Tstg TL - Parameter DC Supply Voltage (Referenced to GND) DC Input Voltage (Referenced to GND) DC Output Voltage (Referenced to GND) DC Input Current, per Pin DC Output Sink/Source Current, per Pin DC Supply Current, VCC and GND Pins Power Dissipation in Still Air, Plastic DIP+ SOIC Package+ Storage Temperature Lead Temperature, 1 mm from Case for 10 Seconds (Plastic DIP or SOIC Package) Value -0.5 to +7.0 -0.5 to VCC +0.5 -0.5 to VCC +0.5 ±20 ±50 ±50 750 500 -65 to +150 260 Unit V V V m A m A m A m W °C °C Maximum Ratings are those values beyond which damage to the device may occur. Functional operation should be restricted to the Remended Operating Conditions. +Derating - Plastic DIP: - 10 m W/°C from 65°...