B45198R Datasheet | Kemet Corporation

Features Wide variety of Low ESR values High ripple current capability High volumetric efficiency Excellent solderability Stable temperature and frequency characteristics Low leakage current, low dissipation factor Low self-inductance High resistance to shock and vibration Suitable for use without series resistor (special operating conditions remended) Lead-free and material content patible with Ro HS Some partnumbers are only available in M (±20%) tolerance; these types have a maximum capacitance drift at +125 °C of +20% Applications Telemunications (e.g. mobile phones, infrastructure) Data processing (e.g. laptops, mainframes) Measuring and control engineering (e.g. voltage regulators) Automotive electronics (e.g. navigation systems, electronic control units) Medical engineering DC/DC converters Soldering Suitable for reflow soldering (IR and vapor phase, in pliance with JEDEC J-STD-020 C) and wave soldering Delivery mode Taped and reeled in accordance with IEC 60286-3 Please read Important notes and Cautions and warnings at the end of this document. Page 2 of 26 Tantalum chip capacitors Speed Power, Low ESR Dimensional drawing B45197A, B45198R, B450, B451 Œ Encapsulation: molded epoxy resin  Ni Fe; tinned surface Sn100 or gold-plated Ž Reduced slot length for case size A Dimensions Case size Dimensions in mm (inches) KEMET EIA/IECQ L W A 3216-18 3.2 ±0.2 (.126 ±0.008) 3.5 ±0.2 (.138 ±0.008) 6.0 ±0.3 (.236 ±0.012) 7.3 ±0.3 (.287 ±0.012) 7.3 ±0.3 (.287 ±0.012) 1.6 ±0.2 (.063 ±0.008) 2.8 ±0.2 (.110 ±0.008) 3.2 ±0.3 (.126 ±0.012) 4.3 ±0.3 (.169 ±0.012) 4.3 ±0.3 (.169 ±0.012) 3528-21 6032-28 7343-31 7343-44 1.6 ±0.2 (.063 ±0.008) 1.9 ±0.2 (.075 ±0.008) 2.5 ±0.3 (.098 ±0.012) 2.8 ±0.3 (.110 ±0.012) 4.1 ±0.3 (.161 ±0.012) L2 typ. W2 ±0.1 H2 typ. P ±0.3 ±(.004) ±(.012) 3.2 1.2 1.3 0.8 (.126) (.047) (.051) (.031) 3.5 2.2 (.138) (.087) 6.1 2.2 (.240) (.087) 7.3 2.4 (.287) (.094) 7.3 2.4 (.287) (.094) 1.4 0.7 (.055) (.027) 1.8 1.3 (.071) (.051) 1.8...