NRSA101M16V6.3X11F Datasheet | Kemet

Kemet Capacitors KEMET WET TANTALUM CAPACITORS Wet tantalum capacitors are usually applied in circuits where the AC ponent is small pared to the DC ponent. Typical uses known to KEMET Electronics include blocking, by-passing, decopling, and filtering. They are also used in timing circuits. If two of these capacitors are connected “back-to-back” (i.e., negative-to-negaive or positive-to-positive), the pair may be used in AC applications (as a non-polar device). Operating temperature: - 55˚C to +125˚. APPLICATIONS: Filtering, bypass circuits. Coupling and timing circuits. Low source impedance circuits. High charging current circuits. DIMENSIONS- MILLIMETERS & (INCHES) Case Size A B D L +0.031 (0.79) 0.453 (11.51) 0.641 (16.28) 1.062 (26.97) D Max 0.219 (5.56) 0.312 (7.92) 0.406 (10.31) Max ESR Ω@ +25˚C 120Hz 3.98 3.32 3.98 3.67 4.42 3.98 5.31 4.22 4.29 2.7 4.42 5.21 5.31 4.95 3.67 2.49 1.53 4.08 2.52 6.83 5.31 5.13 4.02 2.46 10.62 5.97 15.61 11.05 3.54 1.54 2.82 E ±0.25 (6.35) 1.50 (38.10) 2.25 (57.15) 2.25 (57.15) Max Ripple Current m Arms @ 85˚C 120Hz 820 900 820 855 780 900 715 800 850 1400 780 800 715 700 1155 1200 1900 1110 1100 610 890 600 1000 1000 505 800 415 520 1200 1800 1900 MANU CODE failures that can occur in standard Mn O2 Tantalum types. Note also that KOCAPs may be operated at voltages up to 80% of rated voltage with equivalent or better reliability than standard tantalums operated at 50% of rated voltage. The T520 series captures the best Features of multilayer ceramic caps (low ESR and high frequency cap retention), aluminum electrolytics (benign failure mode), and proven solid tantalum technology (volumetric efficiency, surface mount capability, and no wearout mechanism). The KO-CAP can reduce ponent counts, eliminate through-hole assembly by replacing cumbersome leaded aluminum capacitors, and offer a more cost effective solution to high-cost high-cap ceramic capacitors. T520 SERIES- KO-CAP POLYMER TANTALUM The KO-CAP is a tantalum...