FS-N10 Overview
Digital Fiber Sensor FS-N10 Series Instruction Manual 96M11513 FS-N10 Series Quick Start Quick Start Fine sensitivity adjustment Up Down Mode/Output 2 Press the [MODE] button once, then use to select L-on or D-on Setting value Light intensity Sensitivity setting Press once each for workpiece/no workpiece Preset function Configure easily with a single press when receiving light Power select switch 1 Standard ˱MEGA...
FS-N10 Key Features
- This product is just intended to detect the object(s). Do not use this product for the purpose to protect a human body o
- This product is not intended for use as explosion-proof product. Do not use this product in a hazardous location and/or
- This product uses DC power. Do not apply AC power. The product may explode or burn if an AC voltage is applied
- Do not wire the amplifier line along with power lines or high-tension lines, as the sensor may malfunction or be damaged
- When using a mercially available switching regulator, ground the frame ground terminal and ground terminal
- Do not use the FS Series outdoors, or in a place where extraneous light can enter the lightreceiving element directly
- Due to individual dispersion characteristics and the difference in fiber unit models, the maximum sensing distance or di
- If the sensor is used for a long time with the APC function enabled and the LED is imposed with a heavy load, the curren
- UL Certificate
- UL File No. E301717