AAA5060SEEVGAPBEC Datasheet | Kingbright Corporation

Features CHIPS CAN BE CONTROLLED SEPARATELY. SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER PROCESS. AVAILABLE ON TAPE AND REEL. PACKAGE: 500PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 4. Ro HS PLIANT. Description The Hyper Orange source color devices are made with DH In Ga Al P on Ga As substrate Light Emitting Diode. The Green source color devices are made with In Ga N on G-Si C Light Emitting Diode. The Blue source color devices are made with In Ga N on Si C Light Emitting Diode. Static electricity and surge damage the LEDS. It is remended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAG5854 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: JUN/21/2006 DRAWN: W.J.ZHU PAGE: 1 OF 7 ERP: 1201002373 Selection Guide Part No. Dice Lens Type Iv (mcd) [2] @50m A - 30m A Min. HYPER ORANGE(In Ga AIP) AAA5060SEEVGAPBEC GREEN (In Ga N) BLUE (In Ga N) WATER CLEAR 650 - 180 - 110 Typ. 1000 - 350 - 250 100° Viewing Angle [1] 2 θ 1/2 Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. - Luminous intensity with asterisk is measured at 30m A; Luminous intensity / luminous flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol λpeak Parameter Peak Wavelength Device Hyper Orange Green Blue Hyper Orange Green Blue Hyper Orange Green Blue Hyper Orange Green Blue Hyper Orange Green Blue Hyper Orange Green Blue Typ. 630 520 465 621 525 470 20 35 25 25 100 110 2.0 3.2 3.7 2.5 4.0 4.3 10 10 10 Max. Units nm Test Conditions IF=20m A λD [1] Dominant Wavelength nm IF=20m A Δλ1/2 Spectral Line Half-width nm IF=20m A Capacitance p F VF=0V;f=1MHz VF [2] Forward Voltage IF=20m A Reverse Current u A VR = 5V Notes:...