APA2107LVBC-D Datasheet | Kingbright

- 2.1 x 1.0 x 0.6 mm right angle SMD LED, 0.6 mm thickness - Low power consumption - Wide viewing angle - Ideal for backlight and indicator - Package: 2000 pcs / reel - Moisture sensitivity level: 3 - Tinned pads for improved solderability - Halogen-free - Ro HS pliant APPLICATIONS - Backlight - Status indicator - Home and smart appliances - Wearable and portable devices - Healthcare applications ATTENTION Observe precautions for handling electrostatic discharge sensitive devices PACKAGE DIMENSIONS REMENDED SOLDERING PATTERN (units : mm; tolerance : ± 0.1) Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. 5. For right angle SMD LEDs, the solder stencil should be at least 5mil in thickness, to prevent poor solder wetting due to insufficient solder paste. SELECTION GUIDE Part Number APA2107LVBC/D Emitting Color (Material) - Blue (In Ga N) Lens Type Water Clear Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. © 2023 Kingbright. All Rights Reserved. Spec No: DSAN8378 / 1203014436 Rev No: V.6B Date: 01/09/2023 Iv (mcd) @ 2m A...