KA-3021QBS-D Datasheet | Kingbright

Features z 3.0mm x 2.0mm, 1.3mm high, only minimum space required. z Suitable for pact optoelectronic applications. z Low power consumption. z Package : 2000pcs / reel. z Moisture sensitivity level : level 3. z Ro HS pliant. Descriptions z The source color devices are made with In Ga N Light Emitting Diode. z Electrostatic discharge and power surge could damage the LEDs. z It is remended to use a wrist band or antielectrostatic glove when handling the LEDs. z All devices, equipments and machineries must be electrically grounded. Kingbright Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAL0393 APPROVED: Wynec REV NO: V.7B CHECKED: Allen Liu DATE: MAY/17/2016 DRAWN: W.Q.Zhong PAGE: 1 OF 6 ERP: 1201006752 Handling Precautions pare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to ply might lead to damage and premature failure of the LED. 1. Handle the ponent along the side surfaces by using forceps or appropriate tools. 2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry. Kingbright 3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or damage the internal circuitry. 4.1. The inner diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks. 4.2. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the...