KPBA-2006SURKSYKC Datasheet | Kingbright

FEATURES - Side Looking Dual Color Chip LED, 0.6 mm thickness - Low power consumption - Wide viewing angle - Ideal for backlight and indicator - Tinned pads for improved solderability - Package: 2000 pcs / reel - Moisture sensitivity level: 3 - Halogen-free - Ro HS pliant APPLICATIONS - Backlight - Status indicator REMENDED SOLDERING PATTERN - Home and smart appliances - Wearable and portable devices - Healthcare applications ATTENTION Observe precautions for handling electrostatic discharge sensitive devices Notes: 1. All dimensions are in millimeters (inches). 2. Package dimensions tolerance is ±0.1(0.004") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. 5. For right angle SMD LEDs, the solder stencil should be at least 5mil in thickness, to prevent poor solder wetting due to insufficient solder paste. SELECTION GUIDE Part Number Emitting Color (Material) - Hyper Red (Al Ga In P) - Super Bright Yellow (Al Ga In P) Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. - Luminous intensity value is traceable to CIE127-2007 standards. Lens Type Water Clear © 2023 Kingbright. All Rights Reserved. Spec No: DSAQ1490 / 1203016130 Rev No: V.4A Date: 10/30/2023 Iv (mcd) @ 20m A [2] Min. Typ. - 20 - 80 -...