KPED-3528CGCK Datasheet | Kingbright

Features z Single color. z Suitable for all SMD assembly and solder process. z Ideal for backlighting. z Available on tape and reel. z Package: 500pcs / reel. z Moisture sensitivity level : level 3. z Ro HS pliant. Description The Green source color devices are made with Al Ga In P on Ga As substrate Light Emitting Diode. Kingbright Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAC2461 APPROVED: Wynec REV NO: V.11B CHECKED: Allen Liu DATE: NOV/04/2015 DRAWN: L.Q.Xie PAGE: 1 OF 5 ERP: 1203001124 Selection Guide Part No. Emitting Color (Material) Lens Type Green (Al Ga In P) Water Clear Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous Flux: +/-15%. 3. Luminous intensity value is traceable to the CIE127-2007 pliant national standards. Iv (mcd) [2] @ 20m A Min. Typ. Viewing Angle [1] 2θ1/2 40° Electrical / Optical Characteristics at TA=25°C Kingbright Symbol λpeak λD [1] Δλ1/2 C VF [2] Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Emitting Color Green Green Green Green Green Green Typ. 574 570 20 15 2.1 Max. 2.5 10 Units nm nm nm p F V u A Test Conditions IF=20m A IF=20m A IF=20m A VF=0V;f=1MHz IF=20m A VR=5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 pliant national standards. 4. Excess driving current and / or operating temperature higher than remended conditions may result in severe light degradation or premature failure. Absolute Maximum Ratings at TA=25°C Parameter Power...