KI3800 Datasheet | Kingfisher

FEATURES ✓ pact, rugged & light weight ✓ Autotest patibility with other instruments ✓ Interchangeable connectors including SFF styles ✓ 3 year warranty ✓ Excellent optical power stability ✓ Excellent re-connection repeatability ✓ Very long battery life ✓ Low skill operation ✓ Optical test tone generator ISO 9001 TRACEABLE CALIBRATION 3 ~ 7 YEAR WARRANTY FTTx TELCO / CATV LAN / WAN DEFENCE EDUCATION AUTOMOTIVE KI3800 SERIES OPTICAL LIGHT SOURCE The KI 3800 Optical Light Source is used with an Optical Power Meter for measuring loss on singlemode and multimode fiber cable. When used with an Autotest patible Power Meter or Loss test set, one button automated multi-wavelength loss testing is achieved. The test tone function can be used with a patible Power Meter or clip on identifier for fiber detection, continuity testing, fault finding and route location. Multimode LED emitters are optionally pliant with TIA/IEC standards for Coupled Power Ratio (CPR), Center Wavelength and Spectral Width. .. SPECIFICATIONS Laser Output Power, d Bm Short term, stability d B Stability over temp d B λ initial tolerance, nm λ width, nm λ nm/°C Reconnection repeatability, d B Modulation Laser output Note 1: ORL < -25 d B. All emitters are fiber connected for improved stability. Switchable λ options give switched wavelengths through one connector. The long battery life of nearly 15 working weeks eliminates the requirement for rechargeable batteries and time consuming re-charging procedures. The instrument works with C cell or AA batteries, if an AA-to-C battery converter is used. Interchangeable optical connectors work for both 1.25 mm SFF (small form factor) or 2.5 mm connectors. They are dust and drop protected. Instruments e with 3 popular connector adaptor styles. Metal free adaptors avoid contamination of connectors in high power systems. ORDERING INFORMATION LED -23 to 62.5µm -38 to 10µm 0.01 0.35 30 35 / 100 (850 / 1300) 0.4 0.05 ments ± 1 d B For 15 min, typ ± Δ 2°C, after warm...