SP0103NC3 Datasheet | Knowles

features : up to 20d B gain, surface-mountable, patible with standard solder reflow, pick-and-place with standard high speed automated equipment, low output impedance, and excellent environmental characteristics. External amplifiers amplify both signal and external noise induced in the circuit, pared to Si Sonic SP0103 that amplifies the signal prior to external noise. Microphone Dimensional Layout Item Height Length Width Weight Coplanarity Dim. 1.45 6.15 3.76 < 0.5 < 0.1 Tol. (+/-) 0.15 0.05 0.05 Units mm mm mm grams mm Microphone Pin Output Remended PCB Land Layout Knowles Acoustics .knowlesacoustics. Document: SP0103N Last Revision Date: 09-2003 Product Specifications Test Conditions: +20ºC, 60-70% R.H. Limits Symbol Directivity Sensitivity Output impedance Current Consumption Signal to Noise Ratio Typical Input Referred Noise Supply Voltage Sensitivity Loss across Voltage Maximum Input Sound Level S ZOUT IDSS S/N ENL Vs Change in sensitivity over 5.5v to 1.5v Condition Omni-directional @ 1k Hz (0d B=1V/Pa) where R3=0Ω, C1=0.47u F @ 1k Hz (0d B=1V/Pa) across 1.5 to 5.5 volts @ 1k Hz (0d B=1V/Pa) A-weighted 1.5 0.100 55 59 35 5.5 -26 -22 -18 100 0.350 d B Ω m A d B d BA SPL Min. Nom. Max. Unit V d B d B No Change Across Voltage Range At 100d B SPL, THD < 1% At 115d B SPL, THD < 10% -40 -40 100 - 10,000 +100 +100 Operating Temperature Storage Temperature Frequency Range ºC ºC Hz Frequency Response Curve Knowles Acoustics .knowlesacoustics. Document: SP0103N Last Revision Date: 09-2003 Packaging Specifications Carrier - Tape Detail Model Number SP0103NC3 SP0103NC3 Suffix Reel Diameter 7” 13” Qty per Reel 1,200 4,500 Capacitor Config. 10 & 33p F 10 & 33p F Tape & Reel Leader Length Label Available in 7” or 13” diameter. 800mm or minimum of 100 empty pockets Label applied to external package and direct to reel. Per JEDEC. 1 year storage (original packaging, low humidity) “L” - direction -2...