KK2418 - Telephone Tone Ringer

KODENSHI (Kodenshi AUK Group)

General Description

The KK2418 tone ringer derives its power supply by rectifying the AC ringing signal.

It uses this power to activate two tone generators.

📥 Download Datasheet

KK2418 telephone tone ringer by KODENSHI (Kodenshi AUK Group) - Datasheet Preview

Datasheet Details

Part number	KK2418
Manufacturer	KODENSHI (Kodenshi AUK Group)
File Size	246.45 KB
Description	Telephone Tone Ringer
Datasheet	KK2418 Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
KK2000A-3000V	HIGH POWER THYRISTOR	PST
KK2500A-2500V	HIGH POWER THYRISTOR	YZPST
KK25F120	THYRISTOR	SanRex
KK25F160	THYRISTOR	SanRex
KK25F40	THYRISTOR	SanRex

Other Datasheets by KODENSHI (Kodenshi AUK Group)

Part Number	Description
KK2411D	Tone Ringer
KK2411N	Tone Ringer
KK2822M	Dual Low - Voltage Power Amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

TECHNICAL DATA Telephone Tone Ringer with Bridge Diode The KK2418 is a monolithic integrated circuit telephone tone ringer with bridge diode, when coupled with an appropriate transducer, it replaces the electro-mechanical bell. The device is designed for use with either a piezo transducer or an inexpensive transformer coupled speaker to produce a pleasing tone composed of a high frequency (fR) alternating with a low frequency (fL) resulting in a warble frequency. The supply voltage is obtained from the AC ring signal and the circuit is designed so that noise on the line or variation of the ringing signal can not affect correct operation of the device.