KHS072VG1AB-G00 Datasheet | Kyocera Corporation

Caution 1. This Kyocera LCD module has been specifically designed for use only in electronic devices in the areas of audio control, office automation, industrial control, home appliances, etc. The modules should not be used in applications where module failure could result in physical harm or loss of life, and Kyocera expressly disclaims any and all liability relating in any way to the use of the module in such applications. 2. Customer agrees to indemnify, defend and hold Kyocera harmless from and against any and all actions, claims, losses, damages, liabilities, awards, costs, and expenses, including legal fees, resulting from or arising out of Customer's use, or sale for use, of Kyocera modules in applications. 3. Kyocera shall have the right, which Customer hereby acknowledges, to immediately scrap or destroy tooling for Kyocera modules for which no Purchase Orders have been received from the Customer in a two-year period. Revision Date Prepared Checked Record Confirmed by: QA Dept. Checked Approved Designed by: Engineering Dept. Approved Rev. No. Date Page Descriptions Visuals specification 1)Note Item Note General 1.When defects specified in this Inspection Standards are inspected, operating voltage(Vop) shall be set at the level where optimized contrast is available. Display quality is applied up to effective viewing area. (Bi-Level INSPECTION) 2.This inspection standard about the image quality shall be applied to any defect within the effective viewing area and shall not be applicable to outside of the area. 3.Should any defects which are not specified in this standard happen, additional standard shall be determined by mutual agreement between customer and Kyocera. 4.Inspection conditions Luminance Inspection distance Temperature Direction : : : : 500 Lux minimum . 300 mm (from the sample) 25 5 right above Definition of Inspection item Pinhole, Bright spot Black spot, Scratch Foreign particle The color of a small area is different from the...