Datasheet4U Logo Datasheet4U.com

MC3371 - Low Power Narrowband FM IF

Download the MC3371 datasheet PDF. This datasheet also covers the MC3372 variant, as both devices belong to the same low power narrowband fm if family and are provided as variant models within a single manufacturer datasheet.

General Description

OPERATING CONDITIONS VCC = 4.0 Vdc, RFIn = 100 µV, fmod = 1.0 kHz, fdev = 3.0 kHz.

ML3371 at f RF = 10.7 MHz (see Figure 11).

Pin 1 Symbol OSC1 Internal Equivalent Circuit Description The base of the Colpitts oscillator.

Key Features

  • ttenuated by the filter. The typical level is approximately 50 mVpp. 6 7 DEC1 DEC2 DEC2 IF Decoupling. External 0.1 µF capacitors connected to VCC. 8 Quad Coil 8 Quad Coil VCC Quadrature Tuning Coil. Composite (not yet demodulated) 455 kHz IF signal is present. The typical level is 500 mVpp. 10 50 µA Page 6 of 19 www. lansdale. com Issue A ML3371, ML3372.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MC3372_LANSDALESemiconductor.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number MC3371
Manufacturer LANSDALE Semiconductor
File Size 1.39 MB
Description Low Power Narrowband FM IF
Datasheet download datasheet MC3371 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MC3371 (MC3372) LOW POWER FM IF Motorola
MC33702 Microprocessor Power Supply Motorola
MC3370P Zero Voltage Switch Motorola
MC3372 Low Power Narrowband FM IF Motorola
MC3373 Remote Control Amplifier/Detector Motorola

Other Datasheets by LANSDALE Semiconductor

Part Number Description
MC3372 Low Power Narrowband FM IF

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ML3371 ML3372 Low Power Narrowband FM IF Legacy Device: Motorola MC3371, MC3372 The ML3371 and ML3372 perform single conversion FM reception and consist of an oscillator, mixer, limiting IF amplifier, quadrature discriminator, active filter, squelch switch, and meter drive circuitry. These devices are designed for use in FM dual conversion communication equipment. The ML3371/ML3372 are similar to the Motorola MC3361/MC3357 FM IFs, except that a signal strength indicator replaces the scan function controlling driver which is in the MC3361/MC3357. The ML3371 is designed for the use of parallel LC components, while the ML3372 is designed for use with either a 455 kHz ceramic discriminator, or parallel LC components. These devices also require fewer external parts than earlier products.