LC6011 Datasheet | LEADCHIP

DESCRIPTION FEATURES The LC6011 is a single cell, fully integrated constant current (CC)/constant voltage (CV) Li-ion battery charger. Its pact package with minimum external ponents requirement makes the LC6011 ideal for portable applications. No external sense resistor or blocking diode is necessary for the LC6011. Build-in thermal feedback mechanism regulates the charge current to control the die temperature during high power operation or at elevated ambient temperature. The LC6011 has a pre-charge function for trickle charging deeply discharged batteries. The fast charge current can be programmed by an external resistor. CV regulation mode is automatically enabled once the battery’s charging curve reaches the constant voltage portion. The output current then decays and is finally terminated once the charge current drops to 1/10th of the programmed value. The LC6011 keeps monitoring the battery voltage and enables a new charge cycle once the voltage drops by 150m V below the CV value. Power supply state is constantly monitored and the battery drain current is reduced to minimum value automatically when the LC6011 senses a lack of input power. In its shutdown mode, the LC6011 can reduce the supply current to less than 25μA. A status pin outputs a logic HIGH/LOW to indicate the charging status and the presence of power supply. - Standalone Capability with no Requirement of External MOSFET, Sense Resistor or Blocking Diode. - plete Linear Charger in pact Package for Single Cell Lithium-Ion Batteries - Programmable Pre-charge, Fast Charge and Termination Current. - Constant-Current/Constant-Voltage Operation with Thermal Regulation to Maximize Charge Rate Without Risk of Overheating - Charges Single Cell Li-Ion Batteries Directly from USB Port - Preset 4.2V Charge Voltage with 1% Accuracy - Automatic Recharge - Charge Status Output Pin - C/10 Charge Termination - 25A Supply Current in Shutdown - 2.9V Trickle Charge Threshold - Soft-Start Limits Inrush Current -...