HAT1500-S Datasheet | LEM

Features - Hall effect measuring principle - Galvanic isolation between primary - - - - and secondary circuit Isolation voltage 3000 V Low power consumption Extended measuring range( 3 x IPN) Insulated plastic case recognized according to UL 94-V0 .. VC IC R IS VOUT ROUT RL Supply voltage (± 5 %) 4) Current consumption Isolation resistance @ 500 VDC Output voltage @ ± IPN, RL = 10 kΩ, TA = 25°C Output internal resistance Load resistance ± 15 ± 15 > 1000 ±4 100 > 10 V m A MΩ V Ω kΩ Advantages - Easy mounting - Small size and space saving - Only one design for wide current ratings range Accuracy-Dynamic performance data ε VOE VOH VOT TCε G tr f Accuracy @ IPN, TA = 25°C (without offset) Linearity error 1) (0 .. ± IPN) Electrical offset voltage, TA = 25°C Hysteresis offset voltage @ IP = 0; after an excursion of 1 x IPN Thermal drift of VOE Thermal drift of the gain (% of reading) Response time @ 90% of IP Frequency bandwidth 2) (- 3 d B) < ± 1 % of IPN < ± 1 % of IPN < ± 20 m V < ± 10 m V <±1 m V/K < ± 0.1 %/K <5 µs DC .. 25 k Hz - High immunity to external interference. Applications - DC motor drives - Switched Mode Power Supplies (SMPS) General data TA TS m Ambient operating temperature - 10 .. + 80 Ambient storage temperature HAT 200-S, HAT 500..1500-S - 15 .. + 85 HAT 400-S - 25 .. + 85 Mass 300 UL94 classification V0 °C °C °C g - AC variable speed drives - Uninterruptible Power Supplies (UPS) - Battery supplied applications - Power supplies for welding applications Notes : 1) 2) Linearity data exclude the electrical offset. Please refer to derating curves in the technical file to avoid excessive core heating at high frequency. 3) Please consult characterisation report for more technical details and application advice. 4) Operating at ±12V ≤ Vc < ±15V will reduce the measuring range. LEM reserves the right to carry out modifications on its transducers, in order to improve them, without previous...