HAZ6000-SB Datasheet | LEM

Features - Hall effect measuring principle - Galvanic isolation between primary ± 15 ± 30 30,000 12 2000 1) > 1000 ± 10 100 > 10 V m A At k V V MΩ V Ω kΩ VC IC IOC Vd Vb RIS VOUT ROUT RL Supply voltage (± 5 %) Current consumption Overload capacity R.m.s. voltage for AC isolation test, 60 Hz, 1 mn R.m.s. rated voltage, safe separation Isolation resistance @ 500 VDC Output voltage @ ± IPN, RL = 10 kΩ, TA = 25°C Output internal resistance approx. Load resistance - Instantaneous voltage output - Isolation voltage 12k V~ - Low power consumption - Package in PBT meets UL 94-V0 and secondary circuit Advantages - Easy mounting - Small size and space savings - Only one design for wide current - High immunity against external interference ratings range Accuracy - Dynamic performance data ε VOE VOH VOT TCε G tr di/dt f Accuracy @ IPN, TA = 25°C (without offset) Linearity 2) (0 .. ± IPN) Electrical offset voltage, TA = 25°C Hysteresis offset voltage @ IP = 0; after an excursion of 1 x IPN Thermal drift of VOE Thermal drift of the gain (% of reading) Response time @ 90% of IP di/dt accurately followed Frequency bandwidth 3)(- 3 d B) <±1 % < ± 1 % of IPN < ± 50 m V < ± 50 m V <±1 m V/K < ± 0.05 %/K < 10 µs > 50 A/µs DC .. 3 k Hz Applications - Battery supplied applications - Uninterruptible Power Supplies - Power supplies for welding and elemunication applications. (UPS) General data TA TS m Ambient operating temperature Ambient storage temperature Mass Standards 4) Minimum creepage & clearance Housing PBT 30% glassfiber 1) 2) 3) - 25 .. + 80 °C - 25 .. + 80 °C approx. 6 kg EN 50178 45 mm CTI IIIa, UL94-V0 Notes : 4) Pollution class 2, overvoltage category III, reinforced insulation Linearity data exclude the electrical offset. Please refer to derating curves in the technical file to avoid excessive core heating at high frequency Please consult characterisation report for more technical details and application advice. 040713/1 LEM ponents .lem. HAZ 4000 .....