Overview: Current Transducer HX 03..50-P/SP2
For the electronic measurement of currents: DC, AC, pulsed, mixed, with galvanic isolation between the primary circuit (high power) and the secondary circuit (electronic circuit). IPN = 3 .. 50 A Electrical data Primary nominal current rms
IPN (A) Primary current measuring range1)
IPM (A) 3 ±9 5 ± 15 10 ± 30 15 ± 45 20 ± 60 25 ± 75 50 ± 150 All data are given with RL = 2 kW Primary conductor Type diameter x turns (mm) 0.6d x 20T 0.8d x 12T 1.1d x 6T 1.4d x 4T 1.6d x 3T 1.6d x 2T 1.2 x 6.3 x 1T HX 03-P/SP2 HX 05-P/SP2 HX 10-P/SP2 HX 15-P/SP2 HX 20-P/SP2 HX 25-P/SP2 HX 50-P/SP2 VOUT Output voltage (Anarog) @ ± IPN, RL = 2 kW, TA = 25 °C VCE ± 0.625 V ROUT Output internal resistance < 50 W RL Load resistance ≥2 kW VC Supply voltage (± 5 %) + 12 .. 15 V VC Current consumption < 15 mA Accuracy - Dynamic performance data X
ε L Accuracy @ IPN , TA = 25°C (xcluding offset) Linearity error (0 .. ± IPN) < ± 1 % of IPN < ± 1 % of IPN VOE Electorical offset voltage @ IP = 0, TA = 25°C + 2.5V ± 50 mV VOH Hysteresis offset voltage @ IP = 0 after an excursion of 1 x IPN < ± 10 mV TCVOE Temperature coefficient of VOE < ± 1.5 mV/K TCVOH Temerature coefficient of VOUT (% of reading) ± 0.1 %/K tr Response time to 90% of IPN step ≤3 µs BW Frequency bandwidth (- 3 dB) 2) 50 kHz General data TA Ambient operating temperature TS Ambient storage temperature m Mass ... Standards - 25 .. + 85 °C - 25 .. + 85 °C 8 g EN 50178: 1997 Note: 1) With R L=2kΩ 2) Small signal only to avoid excssive heating of the magnetic cores.
