EGP10A
EGP10A is High Efficiency Rectifiers manufactured by LGE.
Features
Low cost Diffused junction Low leakage Low forward voltage High current capability Easily cleaned with alcohol,Isopropanol and similar solvents The plastic material carries U/L recognition 94V-0
Mechanical Data
Case:JEDEC DO--41,molded plastic
Polarity: Color band denotes cathode Weight: 0.012 ounces,0.34 grams Mounting position: Any
- 41
Dimensions in millimeters
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified.
Single phase,half wave,60 Hz,resistive or inductive load. For capacitive load,derate by 20%.
EGP 10A
Maximum recurrent peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forw ard rectified current
9.5mm lead length
@TA=75
Peak forw ard surge current
VRRM VRMS VDC
IF(AV)
50 35 50
8.3ms single half-sine-w ave
IFSM superimposed on rated load @TJ=125 Maximum instantaneous forw ard voltage
@ 1.0 A
Maximum reverse current
@TA=25 at rated DC blocking voltage @TA=125
Maximum reverse recovery time (Note1) trr
Typical junction capacitance (Note2)
Typical thermal resistance
(Note3)
RθJA
Operating junction temperature range
Storage temperature range
TSTG
NOTE: 1. Measured with IF=0.5A, IR=1A,...
