Datasheet4U Logo Datasheet4U.com

LTL1CHJETNN-071A - Through Hole Lamp

Features

  • High luminous intensity output.
  • Low power consumption.
  • High efficiency.
  • Versatile mounting on P. C. Board or panel.
  • I. C. Compatible/low current requirement.
  • 3.1 mm diameter package. Package Dimensions Part No. LTL1CHJETNN-071A Lens Red Transparent Source Color AlInGaP Red Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25mm(.010") unless otherwise noted. 3. Protruded resin under flange is 1.0mm(.04") max. 4. Lead spacing is measured.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LTL101AL06 TFT LCD Samsung
LTL10203 Medium Profile LED Lamps LITE-ON Electronics
LTL10203W Medium Profile LED Lamps LITE-ON Electronics
LTL10213 Medium Profile LED Lamps LITE-ON Electronics
LTL10223 Medium Profile LED Lamps LITE-ON Electronics

Other Datasheets by LITEON

Part Number Description
LTL1CHJEDNN-012A Through Hole Lamp
LTL1CHJEDNN-0H1A Through Hole Lamp
LTL1CHJDE-011A Through Hole Lamp
LTL1CHJGDNN-012A Through Hole Lamp
LTL1CHJGTNN-081A Through Hole Lamp

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Through Hole Lamp Product Data Sheet LTL1CHJETNN-071A Spec No.: DS20-2001-305 Effective Date: 05/18/2001 Revision: - LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C. Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660 http://www.liteon.com/opto LITE-ON ELECTRONICS, INC. Property of Lite-On Only Features * High luminous intensity output. * Low power consumption. * High efficiency. * Versatile mounting on P.C. Board or panel. * I.C. Compatible/low current requirement. * 3.1 mm diameter package. Package Dimensions Part No. LTL1CHJETNN-071A Lens Red Transparent Source Color AlInGaP Red Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25mm(.
Published: |