Datasheet4U Logo Datasheet4U.com

LTL30EKDFGJ-004A - Through Hole Lamp

Features

  • AllnGaP Red and Gap Green chips are matched for uniform light output.
  • T-1 3/4 type package.
  • Long life-solid state reliability.
  • Low power consumption.
  • Pb Free and RoHS compliant Package Dimensions Part No. LTL30EKDFGJ-004A Lens White Diffused Source Color AllnGaP Red / GaP Green Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25mm(.010") unless otherwise noted. 3. Protruded resin under flange is 1.0mm(.04") max. 4. Lead spacing is measure.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LTL-33221AA RECTANGULAR LED LAMP LITE-ON Electronics
LTL-33231AA RECTANGULAR LED LAMP LITE-ON Electronics
LTL-33251AA RECTANGULAR LED LAMP LITE-ON Electronics
LTL-57173G Light Bar LITE-ON Electronics
LTL-57173HR Light Bar LITE-ON Electronics

Other Datasheets by LITEON

Part Number Description
LTL30EKFGJ Through Hole Lamp
LTL30ECBFNJ-112A Through Hole Lamp
LTL30EGRPJ Through Hole Lamp
LTL30EGRPJ-012A Through Hole Lamp
LTL30SETG3JA Through Hole Lamp

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Through Hole Lamp Product Data Sheet LTL30EKDFGJ-004A Spec No.: DS20-2007-0124 Effective Date: 07/30/2009 Revision: A LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C. Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660 http://www.liteon.com/opto LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Features * AllnGaP Red and Gap Green chips are matched for uniform light output. * T-1 3/4 type package. * Long life-solid state reliability. * Low power consumption. * Pb Free and RoHS compliant Package Dimensions Part No. LTL30EKDFGJ-004A Lens White Diffused Source Color AllnGaP Red / GaP Green Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25mm(.
Published: |