P6SMAF12CA Datasheet | LRC

FEATURES - Plastic package has Underwriters Laboratory Flammability Classification 94V-O - For surface mounted applications in order to optimize board space - Low profile package - Built-in strain relief - Glass passivated junction - Low inductance - Excellent clamping capability - Repetition Rate (duty cycle):0.01% - Fast response time: typically less than 1.0ps from 0 Volts to V(BR) for unidirectional types - Typical IR less than 1m A above 10V - High temperature soldering guaranteed: 260°C/10 seconds, MECHANICAL DATA Case: JEDEC SMA-FL molded plastic Terminals: Plated leads, solderable per MIL-STD-202, Method 208 Mounting Position: Any Weight:0.0327 gram 1.DEVICES FOR BIPOLAR APPLICATIONS We declare that the material of product is Haloggen free (green epoxy pound) For Bidirectional use C or CA Suffix for types P6SMAF62CA Electrical characteristics apply in both directions.marking like Uni; without color band. MAXIMUM RATINGS AND CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. RATING Peak Power Dissipation at TA=25°C, TP=1ms(Note 1) SYMBOL PPPM Steady State Power Dissipation at TL=75°C(Note 2) PM(AV) VALUE Minimum 600 Peak Forward Surge Current, 8.3ms Single Half Sine Wave Superimposed on Rated Load(JECED Method) (Note 3) IFSM Operating Temperature Range TJ, Storage Temperature Range TSTG NOTES: 1. Non-repetitive current pulse, per Fig. 3 and derated above TA=25°C per Fig. 2. 2. Mounted on Copper Leaf area of 1.57in2(40mm2). 3. 8.3ms single half sine-wave, duty cycle= 4 pulses per minutes maximum. -55 to +150 -55 to...