Datasheet4U Logo Datasheet4U.com

MCS3AO - 3-element colour sensor

Datasheet Summary

Description

1 V1.1 APPROVED 2001/03/20 MAXIMUM RATINGS / CHARACTERISTICS (TA = 25°C; per single diode) Description Diameter of the light sensitivity area Light sensitivity area per element Photo sensitivity of colour ranges Symbol D A Smax λB λG λR VR IR C tr, tf NEP ϕ Top Tst fR = 100 Hz ∆λ(Filter) < 1%

Features

  • Dielectric filters guaranties the good optical properties of the colour sensors, such as:.
  • high transmission.
  • slight aging of the filter.
  • high temperature stability.
  • high signal frequency.
  • reduced cross talk.
  • small size (diameter of the optical sensitive surface ca. 2 mm).

📥 Download Datasheet

Datasheet preview – MCS3AO

Datasheet Details

Part number MCS3AO
Manufacturer Laser
File Size 202.49 KB
Description 3-element colour sensor
Datasheet download datasheet MCS3AO Datasheet
Additional preview pages of the MCS3AO datasheet.

📁 Similar Datasheet

  • MCS3122 - Advanced KEELOQ Technology Encoder (Microchip)
  • MCS3142 - Dual KEELOQ Technology Encoder (Microchip)
  • MCS38140PG05C - GPS Digital Correlator (Motorola)
  • MCS-100-02 - Wi-Fi Antenna (Gemicom)
  • MCS-51 - (MCS-51/-96) Packaging Information (Intel Corporation)
  • MCS-96 - (MCS-51/-96) Packaging Information (Intel Corporation)
  • MCS0402 - Professional Thin Film Chip Resistors (Vishay)
  • MCS0402 - (MCS0402 - MCS0805) Professional flat chip resistors (BC)
  • MCS0402AT - High Stability Thin Film Flat Chip Resistors (Vishay)
  • MCS0603 - (MCS0402 - MCS0805) Professional flat chip resistors (BC)
Other Datasheets by Laser
  • MCS3AT - 3-element colour sensor
  • MCS3BT - 3-element colour sensor

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com DATA-SHEET MCS3AO 3-element colour sensor – TO5 with optics FUNCTION The colour sensors are made of 3 Si-PIN photo diodes integrated on chip. They are carried out as segments of a ring with the diameter of 2,0 mm. The design as Si-PIN photo diodes allows signal frequencies up to MHz-range. In order to achieve a small cross talk between the photodiodes the individual sectors were separated from each other by additional structures. Each of these photodiodes is sensitised with dielectric spectral filter for its colour range, preferably for the primary colours red, green and blue.
Published: |