ispGDX160VA-7B208I
ispGDX160VA-7B208I is In-System Programmable 3.3V Generic Digital CrosspointTM manufactured by Lattice Semiconductor.
isp GDX 160V/VA
In-System Programmable 3.3V Generic Digital Crosspoint
Features
- IN-SYSTEM PROGRAMMABLE GENERIC DIGITAL CROSSPOINT FAMILY
- Advanced Architecture Addresses Programmable PCB Interconnect, Bus Interface Integration and Jumper/Switch Replacement
- “Any Input to Any Output” Routing
- Fixed HIGH or LOW Output Option for Jumper/DIP Switch Emulation
- Space-Saving PQFP and BGA Packaging
- Dedicated IEEE 1149.1-pliant Boundary Scan Test
- HIGH PERFORMANCE E2CMOS® TECHNOLOGY
- 3.3V Core Power Supply
- 3.5ns Input-to-Output/3.5ns Clock-to-Output Delay-
- 250MHz Maximum Clock Frequency-
- TTL/3.3V/2.5V patible Input Thresholds and Output Levels (Individually Programmable)-
- Low-Power: 16.5m A Quiescent Icc-
- 24m A IOL Drive with Programmable Slew Rate Control Option
- PCI patible Drive Capability-
- Schmitt Trigger Inputs for Noise Immunity
- Electrically Erasable and Reprogrammable
- Non-Volatile E2CMOS Technology
- isp GDXV™ OFFERS THE FOLLOWING ADVANTAGES
- 3.3V In-System Programmable Using Boundary Scan Test Access Port (TAP)
- Change Interconnects in Seconds
- FLEXIBLE ARCHITECTURE
- binatorial/Latched/Registered Inputs or Outputs
- Individual I/O Tri-state Control with Polarity Control
- Dedicated Clock/Clock Enable Input Pins (four) or Programmable Clocks/Clock Enables from I/O Pins (40)
- Single Level 4:1 Dynamic Path Selection (Tpd = 3.5ns)
- Programmable Wide-MUX Cascade Feature Supports up to 16:1 MUX
- Programmable Pull-ups, Bus Hold Latch and Open Drain on I/O...
