LMUN2112LT3G Datasheet | Leshan Radio Company

LESHAN RADIO PANY, LTD. Bias Resistor Transistors PNP Silicon Surface Mount Transistors with Monolithic Bias Resistor Network LMUN21xx LT1G SERIES This new series of digital transistors is designed to replace a single device and its external resistor bias network. The BRT (Bias Resistor Transistor) contains a single transistor with a monolithic bias network consisting of two resistors; a series base resistor and a base-emitter resistor. The BRT eliminates these individual ponents by integrating them into a single device. The use of a BRT can reduce both system cost and board space. The device is housed in the SOT-23 package which is designed for low power surface mount applications. - Simplifies Circuit Design - Reduces Board Space - Reduces ponent Count - The SOT-23 package can be soldered using wave or reflow. The modified gull-winged leads absorb thermal stress during soldering eliminating the possibility of damage to the die. - Available in 8 mm embossed tape and reel. Use the Device Number to order the 7 inch/3000 unit reel. Replace “T1” with “T3” in the Device Number to order the 13 inch/10,000 unit reel. - We declare that the material of product pliance with Ro HS requirements. 1 2 SOT-23 PIN 1 BASE (INPUT) R1 R2 PIN 3 COLLECTOR (OUTPUT) PIN 2 EMITTER (GROUND) MAXIMUM RATINGS (TA = 25°C unless otherwise noted) Rating Symbol Value Collector-Base Voltage VCBO Collector-Emitter Voltage VCEO Collector Current THERMAL CHARACTERISTICS 50 50 100 Characteristic...