Datasheet4U Logo Datasheet4U.com

LT1508 - Power Factor and PWM Controller(Voltage Mode)

Download the LT1508 datasheet PDF. This datasheet also covers the LT1 variant, as both devices belong to the same power factor and pwm controller(voltage mode) family and are provided as variant models within a single manufacturer datasheet.

General Description

The LT ® 1508 is a complete solution for universal off-line switching power supplies utilizing active power factor correction.

The PFC section is identical to the LT1248 PFC controller except the EN/SYNC pin is removed because PFC and PWM are synchronized internally.

Key Features

  • s s s s s s s s s s s s.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (LT1-508.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
LT1501G 1.5A GLASS PASSIVATED RECTIFIER Diodes Incorporated
LT1502G 1.5A GLASS PASSIVATED RECTIFIER Diodes Incorporated
LT1503G 1.5A GLASS PASSIVATED RECTIFIER Diodes Incorporated
LT1504G 1.5A GLASS PASSIVATED RECTIFIER Diodes Incorporated
LT1505G 1.5A GLASS PASSIVATED RECTIFIER Diodes Incorporated

Other Datasheets by Linear Technology (now Analog Devices)

Part Number Description
LT1500 Adaptive-Frequency Current Mode Switching Regulators
LT1501 Adaptive-Frequency Current Mode Switching Regulators
LT1505 Constant-Current/Voltage High Efficiency Battery Charger
LT1506 4.5A/ 500kHz Step-Down Switching Regulator
LT1507 500kHz Monolithic Buck Mode Switching Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LT1508 Power Factor and PWM Controller (Voltage Mode) FEATURES s s s s s s s s s s s s DESCRIPTION The LT ® 1508 is a complete solution for universal off-line switching power supplies utilizing active power factor correction. The PFC section is identical to the LT1248 PFC controller except the EN/SYNC pin is removed because PFC and PWM are synchronized internally. The voltage mode PWM section (LT1509 is the current mode counterpart) contains all the primary side functions to convert the PFC preregulated high voltage output to an isolated low voltage output. The PWM duty cycle is internally limited to 47% (maximum 50%) to prevent transformer saturation. PWM soft start begins when the PFC output reaches the preset voltage.