Datasheet4U Logo Datasheet4U.com

LT3491 - White LED Driver

Key Features

  • a unique high side LED current sense that enables the part to function as a “one wire current source;” one side of the LED string can be returned to ground anywhere, allowing a simpler one wire LED connection. Traditional LED drivers use a grounded resistor to sense LED current, requiring a 2-wire connection to the LED string. The 2.3MHz switching frequency allows the use of tiny inductors and capacitors. A single pin performs both shutdown and accurate LED dimming control. Few external componen.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LT3497 Dual Full Function White LED Driver Linear
LT3420 Photoflash Capacitor Chargers Linear
LT3420-1 Photoflash Capacitor Chargers Linear
LT3460-1 1.3 MHz/650kHz Step-Up DC/DC Converter Linear
LT3462 Inverting 1.2MHz/2.7MHz DC/DC Converters Linear

Other Datasheets by Linear Technology (now Analog Devices)

Part Number Description
LT3490 Single Cell 350mA LED Driver
LT3492 Triple Output LED Driver
LT3493 750kHz Step-Down Switching Regulator
LT3493-3 750kHz Step-Down Switching Regulator
LT3494 Micropower Low Noise Boost Converters

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LT3491 White LED Driver with Integrated Schottky in SC70 and 2mm × 2mm DFN DESCRIPTIO The LT®3491 is a fixed frequency step-up DC/DC converter specifically designed to drive up to six white LEDs in series from a Li-Ion cell. Series connection of the LEDs provides identical LED currents resulting in uniform brightness and eliminating the need for ballast resistors. The device features a unique high side LED current sense that enables the part to function as a “one wire current source;” one side of the LED string can be returned to ground anywhere, allowing a simpler one wire LED connection. Traditional LED drivers use a grounded resistor to sense LED current, requiring a 2-wire connection to the LED string. The 2.3MHz switching frequency allows the use of tiny inductors and capacitors.