Datasheet4U Logo Datasheet4U.com

LT3507 - Triple Monolithic Step-Down Regulator

General Description

The LT®3507 is a triple, current mode, DC/DC converter with internal power switches and a low dropout regulator.

The switching converters are step-down converters capable of generating one 2.4A output and two 1.5A outputs.

All three converters are synchronized to a single oscillator.

Key Features

  • n n n n n n n n n LT3507 Triple Monolithic Step-Down Regulator with LDO.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LT3507A Triple Monolithic Step-Down Regulator Linear
LT3504 Quad 40V/1A Step-Down Switching Regulator Linear
LT3508 Dual Monolithic 1.4A Step-Down Switching Regulator Analog Devices
LT35 projector NEC
LT3514 Triple Step-Down Switching Regulator Linear

Other Datasheets by Linear Technology (now Analog Devices)

Part Number Description
LT3500 Monolithic 2A Step-Down Regulator Plus Linear Regulator/Controller
LT3501 Monolithic Dual Tracking 3A Step-Down Switching Regulator
LT3502 1.1MHz/2.2MHz 500mA Step-Down Regulators
LT3502A 1.1MHz/2.2MHz 500mA Step-Down Regulators
LT3503 2.2MHz Step-Down Switching Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com FEATURES n n n n n n n n n LT3507 Triple Monolithic Step-Down Regulator with LDO DESCRIPTION The LT®3507 is a triple, current mode, DC/DC converter with internal power switches and a low dropout regulator. The switching converters are step-down converters capable of generating one 2.4A output and two 1.5A outputs. All three converters are synchronized to a single oscillator. The 2.4A output runs with opposite phase to the other two converters, reducing input ripple current. Each regulator has independent shutdown and soft-start circuits, and generates a power good signal when its output is in regulation, easing power supply sequencing and interfacing with microcontrollers and DSPs. The switching frequency is set with a single resistor yielding a range of 250kHz to 2.