Datasheet4U Logo Datasheet4U.com

LTC1164-8 - Ultraselective/ Low Power 8th Order Elliptic Bandpass Filter

Description

The LTC®1164-8 is a monolithic ultraselective, 8th order, elliptic bandpass filter.

The passband of the LTC1164-8 is tuned with an external clock and the clock-to-center frequency ratio is 100:1.

3dB pass bandwidth is typically 1% of the filter center frequency.

Features

  • s s s s s s.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LTC1000-S Current Transducer LEM
LTC1000-SF Current Transducer LEM
LTC1000-SFC Current Transducer LEM
LTC1000-T Current Transducer LEM
LTC1044 Switched Capacitor Voltage Converter Analog Devices

Other Datasheets by Linear Technology (Analog Devices)

Part Number Description
LTC1164-5 Low Power 8th Order Pin Selectable Butterworth or Bessel Lowpass Filter
LTC1164-6 Low Power 8th Order Pin Selectable Elliptic or Linear Phase Lowpass Filter
LTC1164-7 Low Power/ Linear Phase 8th Order Lowpass Filter
LTC1164 Low Power/ Low Noise/ Quad Universal Filter Building Block
LTC1163 Triple 1.8V to 6V High-Side MOSFET Drivers

Full PDF Text Transcription

Click to expand full text
LTC1164-8 Ultraselective, Low Power 8th Order Elliptic Bandpass Filter with Adjustable Gain FEATURES s s s s s s DESCRIPTION The LTC®1164-8 is a monolithic ultraselective, 8th order, elliptic bandpass filter. The passband of the LTC1164-8 is tuned with an external clock and the clock-to-center frequency ratio is 100:1. The – 3dB pass bandwidth is typically 1% of the filter center frequency. The stopband attenuation of the LTC1164-8 is greater than 50dB. The lower and upper stopband frequencies are less than 0.96 • center frequency and greater than 1.04 • center frequency, respectively. The LTC1164-8 requires an external op amp and two external resistors (see the circuit below). The filter’s gain at center frequency is set by the ratio RIN /RF.
Published: |