LTC1322 Datasheet | Linear Technology

LTC1321/LTC1322/LTC1335 RS232/EIA562/RS485 Transceivers Features s s DESCRIPTIO s s s s s s s s s s s s s LTC1321: 2-EIA562/RS232 Transceivers/2-RS485 Transceivers LTC1322: 4-EIA562/RS232 Transceivers/2-RS485 Transceivers LTC1335: 4-EIA562 Transceivers/2-RS485 Transceivers with OE LTC1321/LTC1322 Have the Same Pinout as SP301/SP302 LTC1335 Features Receiver Three-State Outputs Low Supply Current: 1m A Typical 15µA Supply Current in Shutdown 120k Baud in EIA/TIA-562 or RS232 Mode 10MBaud in RS485/RS422 Mode Self-Testing Capability in Loopback Mode Power-Up/Down Glitch-Free Outputs Driver Maintains High Impedance in Three-State, Shutdown or With Power Off Thermal Shutdown Protection I/O Lines Can Withstand ± 25V Withstands Repeated 10k V ESD Pulses The LTC1321/LTC1322/LTC1335 are low power CMOS bidirectional transceivers, each featuring two reconfigurable interface ports. Each can be configured as two RS485 differential ports, as two single-ended ports, or as one RS485 differential port and one single-ended port. The LTC1321/LTC1322 can provide RS232 or EIA562 patible single-ended outputs; the LTC1335 provides EIA562 patible outputs and additionally includes an output enable pin, allowing the receiver logic level outputs to be three-stated. The RS232/EIA562 transceivers operate to 120kbaud and are in full pliance with EIA/TIA-562 specification. The RS485 transceivers operate to 10Mbaud and are in full pliance with RS485 and RS422 specifications. All interface drivers feature short-circuit and thermal shutdown protection. An enable pin allows RS485 driver outputs to be forced into high impedance which is maintained even when the outputs are forced beyond supply rails or power is off. Both driver outputs and receiver inputs feature ±10k V ESD protection. A loopback mode connects the driver outputs back to the receiver inputs for diagnostic self-test. The LTC1321/LTC1322 can support RS232 voltage levels when 6.5V ≤ VDD ≤ 10V and - 6.5V ≥ VEE ≥ - 10V. The...