Datasheet4U Logo Datasheet4U.com

LTC1517-5 - Micropower/ Regulated 5V Charge Pump

Description

The LTC®1517-5 is a micropower charge pump DC/DC converter that produces a regulated 5V output.

The input voltage range is 2.7V to 5V.

Features

  • s s s s s.

📥 Download Datasheet

Datasheet preview – LTC1517-5

Datasheet Details

Part number LTC1517-5
Manufacturer Linear Technology
File Size 211.00 KB
Description Micropower/ Regulated 5V Charge Pump
Datasheet download datasheet LTC1517-5 Datasheet
Additional preview pages of the LTC1517-5 datasheet.

📁 Similar Datasheet

  • LTC1555L - SIM Power Supply and Level Translator (Linear)
  • LTC1563-2 - 4th Order Lowpass Filter (Linear)
  • LTC1563-3 - 4th Order Lowpass Filter (Linear)
  • LTC1564 - 10kHz to 150kHz Digitally Controlled Antialiasing Filter and 4-Bit P.G.A (Linear)
  • LTC1588 - 12-/14-/16-Bit SoftSpan DACs (Linear)
  • LTC1589 - 12-/14-/16-Bit SoftSpan DACs (Linear)
  • LTC1592 - 12-/14-/16-Bit SoftSpan DACs (Linear)
  • LTC1000-S - Current Transducer (LEM)
  • LTC1000-SF - Current Transducer (LEM)
  • LTC1000-SFC - Current Transducer (LEM)
Other Datasheets by Linear Technology
  • LTC1517-3.3 - Micropower / Regulated 3.3V Charge Pump
  • LTC1514-3.3 - Step-Up/Step-Down Switched Capacitor DC/DC Converters
  • LTC1514-5 - Step-Up/Step-Down Switched Capacitor DC/DC Converters
  • LTC1515 - Step-Up/Step-Down Switched Capacitor DC/DC Converters
  • LTC1516 - Micropower/ Regulated 5V Charge Pump DC/DC Converter
  • LTC1518 - 52Mbps Precision Delay RS485 Quad Line Receivers
  • LTC1519 - 52Mbps Precision Delay RS485 Quad Line Receivers
  • LTC1502-3.3 - Single Cell to 3.3V Regulated Charge Pump DC/DC Converter

Full PDF Text Transcription

Click to expand full text
LTC1517-5 Micropower, Regulated 5V Charge Pump in a 5-Pin SOT-23 Package FEATURES s s s s s DESCRIPTION The LTC®1517-5 is a micropower charge pump DC/DC converter that produces a regulated 5V output. The input voltage range is 2.7V to 5V. Extremely low operating current (typically 6µA with no load) and low external parts count (one 0.1µF flying capacitor and two small bypass capacitors at VIN and VOUT) make the part ideally suited for small, light load battery-powered applications. The total printed circuit board area of the application circuit shown below is only 0.045in2. The part operates as a Burst ModeTM switched-capacitor voltage doubler to produce a regulated output. The part has thermal shutdown capability and can survive a continuous short circuit from VOUT to GND.
Published: |