Datasheet4U Logo Datasheet4U.com

LTC1624 - High Efficiency SO-8 N-Channel Switching Regulator Controller

Download the LTC1624 datasheet PDF. This datasheet also covers the LTC variant, as both devices belong to the same high efficiency so-8 n-channel switching regulator controller family and are provided as variant models within a single manufacturer datasheet.

General Description

The LTC®1624 is a current mode switching regulator controller that drives an external N-channel power MOSFET using a fixed frequency architecture.

It can be operated in all standard switching configurations including boost, step-down, inverting and SEPIC.

Key Features

  • s s.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (LTC-1624.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
LTC1628-SYNC 2-Phase Synchronous Step-Down Switching Regulator Linear
LTC1608 Sampling A/D Converter Linear
LTC1609 Serial ADC Linear
LTC1643AH PCI-Bus Hot Swap Controller Linear
LTC1643AL PCI-Bus Hot Swap Controller Linear

Other Datasheets by Linear Technology (now Analog Devices)

Part Number Description
LTC1622 Low Input Voltage Current Mode Step-Down DC/DC Controller
LTC1623 SMBus Dual High Side Switch Controller
LTC1625 Current Mode Synchronous Step-Down Switching Regulator
LTC1626 Low Voltage High Efficiency Step-Down DC/DC Converter
LTC1627 Monolithic Synchronous Step-Down Switching Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LTC1624 High Efficiency SO-8 N-Channel Switching Regulator Controller FEATURES s s DESCRIPTION The LTC®1624 is a current mode switching regulator controller that drives an external N-channel power MOSFET using a fixed frequency architecture. It can be operated in all standard switching configurations including boost, step-down, inverting and SEPIC. Burst ModeTM operation provides high efficiency at low load currents. A maximum high duty cycle limit of 95% provides low dropout operation which extends operating time in battery-operated systems. The operating frequency is internally set to 200kHz, allowing small inductor values and minimizing PC board space. The operating current level is user-programmable via an external current sense resistor.